Do You Want To Change The Daily Heating / Cooling Periods - Siemens Synco 700 Manuel D'utilisation

Do you want to change the daily heating / cooling periods?

General
In the time switch program, you can set the daily heating
/ cooling periods to suit your individual needs. Each day
can accommodate a maximum of 6 switching points; a
room setpoint is assigned to each time period.
In addition to the weekdays (Monday through Sunday),
you can program a special day, that is, a special 24-hour
heating / cooling program.
The special day will be activated when you making an
entry on the Holidays / special days menu (
Changes on the controller can be made only if the heat-
ing program is predefined by the time switch in the
controller. If the program is defined by an external opera-
tor station, changes to the program can only be made
from that station.
16
Siemens Building Technologies / HVAC Products
page 19).
Welcome > Main menu > Time switch... > ...
Path:
CE1B3144x2
Before making entries, please observe
• First, always enter the start time of the heating / cool-
ing period, then the room operating mode of that pe-
riod
• You have the room operating modes
choose from. From the Controller 1 and Controller 2 menu
( pages 11 and 12), select the associated setpoints
• You can copy any 24-hour heating / cooling program
to other days ( page 17).
Changing and canceling times and setpoints
1. Select the required day.
2. In the diagram, advance pointer
time to be changed.
3. Set the required time.
Reset the time via 00:00 until ––:–– appears.
4. Select the required operating mode
5. If required, set additional times and select additional
setpoints.
74 319 0350 0
, , and to
to the point in
16.05.2003