You Don't Want To Heat According To The Time Switch Program - Siemens Synco 700 Manuel D'utilisation

You don't want to heat according to the time switch program

Other room operating modes
If you do not want to heat or cool according to the time
switch program (that is, not automatically), you need to
change the preselection for the room operating mode.
From menu option Preselection, select a room operating
mode that suits your needs:
Plant ON, heating / cooling to the
Comfort
Comfort setpoint
Plant ON, heating / cooling to the
Precomfort
Precomfort setpoint
Economy Plant OFF, unoccupied mode
heating / cooling to the Economy
setpoint; night cooling and frost
protection function activated
Plant OFF,
Protection
frost protection function activated
Path:
If you want to heat / cool temporarily with a «Continuous operating mode»,
10
Siemens Building Technologies / HVAC Products
Welcome > Main menu > Room operating mode... > Preselection: > ...
don't forget to return to AUTO mode in due time!
CE1B3144x2
Setpoints
The setpoints assigned to the room operating modes use
the same symbols and designations.
Settings: pages 11 and 12.
74 319 0350 0 16.05.2003