Do You Want To Change The Daily Heating Periods - Siemens Synco 700 Mode D'emploi

Do you want to change the daily heating periods?

General information about the heating program
In the heating program, you can set the daily heating
periods to suit your individual needs. Each day can
accommodate a maximum of 6 switching points; a room
setpoint must be assigned to each heating period.
In addition to the weekdays (Monday through Sunday),
you can program a special day, that is, a special 24-hour
heating program.
The special day will be activated when you making an
entry on the Holidays/special days menu (
If your plant comprises 2 heating circuits, you can set the
heating program for both heating circuits separately
(Path: ... > Time switch 2... >... ).
Changes on the controller can be made only if the heat-
ing program is predefined by the time switch in the
controller. Otherwise, it is an external operator station.
10
Siemens Building Technologies / HVAC Products
Prior to making entries, please observe
• First, always enter the start time of the heating period,
then the room operating mode of that period
• You have the room operating modes
choose from. Adjust the associated setpoints on the
Room setpoints menu (
• You can copy any 24-hour heating program to other
days (
Changing and canceling times and setpoints
page 20).
1. Select the required day.
2. In the diagram, advance pointer
3. Set the required time.
4. Select the required setpoint.
5. If required, set additional times and select additional
Main menu > Time switch ...
Path:
CE1B3131x2-en
page 13)
page 11)
time to be changed.
Canceling the time: Reset the time via 00:00 until
––:–– appears.
setpoints.
74 319 0346 0 a
, and to
to the point in
19.11.2004