Commissioning And Testing; Maintenance Of The Appliance - Bartscher 900 Serie Manuel D'instructions

-

2.3. COMMISSIONING AND TESTING

 Once all the connections have been made, the appliance and the overall installation
must be checked following the directions given in this manual.
 Check in particular:
 that the protective film has been removed from the external surfaces;
 that the terminal board housing, removed for electrical connections, has been
reinstalled.
 that connections have been made in accordance with the requirements and
directions indicated in this manual;
 that all safety requirements in current standards, statutory regulations and directives
have been met;
 that the water connections are leak-free;
 that the electrical connection has been performed according to standards.
 In addition, check that once the appliance has been installed, the power cord is neither
subject to stretch nor in contact with nor surfaces.
 Now proceed to light the appliance as directed in the instructions for use.
 While the appliance is in use, voltage should not differ from the nominal voltage more
than +/- 10%.
 The test report must be completed in full and submitted to the customer who should
then sign in acceptance. With effect from this moment, the appliance is covered by the
manufacturer's warranty.

2.4. MAINTENANCE OF THE APPLIANCE

Warning! : All maintenance operations shall only be performed by a technically
qualified service centre!
 To ensure correct and safe operation, the appliance must be inspected and serviced at
least once a year only. Maintenance includes also to control the components and tear
of pipes, feeding pipes, electrical components etc..
 It is advisable to replace worn components during maintenance operations to avoid the
need for other maintenance calls and unexpected failures.
 It is also advisable to apply for a maintenance contract with the customer.
Instruction manual for installation, maintenance and use
Electric tilting cooker BM.E080-200
- GB - 12 di 35
Page