Bartscher 900 Serie Manuel D'instructions page 53

R
EPLACEMENT OF WORKING OR SAFETY THERMOSTAT
Disconnect power cables, after having removed the front panel.
-
Remove the insulation protection, unloosing the fixing screws to the pan.
-
- Remove the protection panel of heating elements.
- Remove the support plate of central heating element.
Remove the central heating element and then the fixing bulb boss.
-
Replacing the new thermostat be careful about tightening of the boss on the bulbs.
-
If the bulbs would be squeezed, this would cause the damage of thermostat.
R
EPLACEMENT OF THE SWITCH
Disconnect the power cables, after having removed the front panel.
-
Replace the switch uloosing the fixing screws to the support , after having taken off the
-
coaxial working thermostat.
Fit the new switch in the reverse order of operation.
-
Instruction manual for installation, maintenance and use
Electric tilting cooker BM.E080-200
- GB - 19 di 35
Page