Bartscher 900 Serie Manuel D'instructions page 52

Maintenance operations and repairs must be performed only
by specialists!
Disconnect the appliance. After having removed the control knob, remove the control
panel, the handle of water inlet tap and the handwheel for tilting of pan.
R
EPLACEMENT OF HEATING ELEMENTS
Disconnect the electric cables to heating elements.
-
- Remove the front fixed panel and the steady pin of the tilting pan lever..
- Rotate the pan in the max. opening.
Remove the insulation protection , unloosing the fixing screws to the pan.
-
Remove the protection panel of heating elements.
-
Remove the heating element support plate from damaged heating element.
-
- Fit the new heating element operating in the opposite order.
R
EPLACEMENT OF SIGNAL LAMP
- Disconnect the power cables.
Remove the signal lamp, unscrewing the fixed to the control pane .
-
Fit the new signal lamp in the reverse order of operation.
-
Instruction manual for installation, maintenance and use
Electric tilting cooker BM.E080-200
3.6. HOW TO PROCEED, IF ...
- GB - 18 di 35
Page