Automatic Pre-Heating; Deactivation Of Automatic Preheating - GGM gastro HB364M Manuel D'instructions Pour L'installation, L'utilisation Et L'entretien

EXAMPLE OF PROGRAMMED COOKING
Turn the oven wit ON/OFF button
Press the PROGRAMMES
TEMPERATURE/PROGRAMMES display (10))
Choose the programme number with INCREASE
Press the START/STOP button
programme and the use of pre-heating).

4. AUTOMATIC PRE-HEATING

Automatic pre-heating enters in action only when you go for a programme which is among those stored. It
consists in heating the oven at a temperature of 30°C higher than the set temperature in that phase of the
programme. This function serves to compensate for the heat loss that occurs when you open the oven door
to put the food inside.
When you start a programme with the START/STOP button
chamber and on the TEMPERATURE/PROGRAMMING display (10) appears a message saying PRE. Once
reached the estimated temperature, the oven emits a sounds. At this point you need to open the door (the
sound now stops), place the food in the over and close the door. The previously selected programme will run
automatically.
Otherwise, if you want to turn off that sound without opening the door, you have to push the START/STOP
button
.

4.1 DEACTIVATION OF AUTOMATIC PREHEATING

With the oven in ON, to disable the AUTOMATIC PRE-HEATING function it is necessary to follow these
guidelines:
- Press AND
TIME/HUMIDITY display ( 9 ) appears the message PRE-HEATING. At this point press HUMIDITY
to confirm.
button
(cooking starts with the previously set parameters of the chosen
at the same time for 4 seconds. Press
(appears a flashing
or DECREASE
, the oven starts to heat up the cooking
P01 message on
or until in the
36
the