GGM gastro HB364M Manuel D'instructions Pour L'installation, L'utilisation Et L'entretien page 30

the probe, TEMPERATURE icon
value (TIME icon
15 minutes after the end of each cooking: (pressing
terminated with timed cooking) and then no other button is pressed, the oven goes on OFF. To turn on the
control, simply press the ON/OFF
EXAMPLE OF PROGRAMMING IN MANUAL COOKING
Set:
180° C
20 mins
Turn the oven on with the ON/OFF button
(In the TEMPERATURE/PROGRAMMES display (10) the temperature present in the cooking chamber
appears; in the TIME/HUMIDITY display (9) the message END appears)
Set the temperature pressing the INCREASE
wait for the TEMPERATURE/PROGRAMMES (10) display stops flashing
(the temperature will this way be set to 180°C and the TEMPERATURE/PROGRAMMES display (10) will
return to show the temperature present in the cooking chamber.
The RESISTORS icon
cooking chamber)
To set the time press the TIME button
TIME/HUMIDITY display (9)), press the INCREASE
20 minutes and wait for the TIME/HUMIDITY ( 9 ) display to stop flashing (the time will be set).
Press the START/STOP button
The humidity in the manual programme is at the discretion of the operation through pressing the
HUMIDITY button
flashing) and the TIME/HUMIDITY display (9) shows the END time
on steady red).
.
Temperature
Time
will turn green to indicate that the set temperature is higher than that of the
to begin cooking.
for the desired time while cooking.
the START/STOP button
or DECREASE
(which will make the END message flash on the
or DECREASE
or automatically
button until reaching 180°C;
buttons until you reach
30