Maintenance - Ryobi P580 Manuel D'utilisation

wARNiNG:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
wARNiNG:
Always wear eye protection with side shields marked
to comply with ANSI Z87.1 during product operation. If
operation is dusty, also wear a dust mask.
GENERAL MAiNTENANcE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
wARNiNG:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
TOOL STORAGE
Before storing, always remove the battery pack from the
tool.
NOTE: FiGURES (iLLUSTRATiONS) START ON PAGE 13
AFTER FRENch ANd SPANiSh LANGUAGE SEcTiONS

MAiNTENANcE

BATTERy PAck PREPARATiON FOR
REcycLiNG
wARNiNG:
Upon removal, cover the battery pack's terminals with
heavy-duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its compo-
nents. Lithium-ion and nickel-cadmium batteries must
be recycled or disposed of properly. Also, never touch
both terminals with metal objects and/or body parts as
short circuit may result. Keep away from children. Failure
to comply with these warnings could result in fire and/
or serious injury.
LUBRicATiON
All of the bearings in this product are lubricated with a
sufficient amount of high grade lubricant for the life of the
unit under normal operating conditions. Therefore, no further
lubrication is required.
whEEL MAiNTENANcE
If wheel cutting ability deteriorates or becomes slow, the wheel
may need resurfacing. Cutting a brick paver will resurface
the wheel and improve wheel cutting ability.
12 — English