Features; Assembly - Ryobi P580 Manuel D'utilisation

PROdUcT SPEciFicATiONS
Motor ......................................................................18 V DC
Wheel Diameter ............................................................ 4 in.
Wheel Arbor ............................................................... 5/8 in.
Cutting Depth at 0º .................................................... 7/8 in.
kNOw yOUR TiLE SAw
See Figure 1, page 13.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BEvEL AdJUSTMENT
The bevel adjustment feature allows you to make bevel cuts
up to 45º.
cONTiNUOUS RiM diAMONd whEEL
The continuous rim diamond wheel provided with this saw
is for wet or dry cutting.
dEPTh AdJUSTMENT
Change the depth of cut from 0 to 7/8 in. using the depth
adjustment feature.
UNPAckiNG
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
wARNiNG:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.

FEATURES

No Load Speed ..................................... 4,500 r/min. (RPM)
Cutting Depth at 45º .................................................. 5/8 in.
Wheel Type ......................Continuous Rim Diamond Wheel
Net Weight ............................................................... 5.7 lbs.
ERGONOMic dESiGN
The design provides comfort when operating in different
positions and at different angles.
LOck-OFF BUTTON
The lock-off button reduces the possibility of accidental
starting.
GRAviTy FEEd wATER BOTTLE
For wet tile cutting, the water bottle supplies water to cool
and lubricate the cutting wheel.
wATER cONTROL vALvE
Allows adjustment of water flow to match the material
being cut and provides a quick shutoff

ASSEMBLy

 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PAckiNG LiST
Wet/Dry Tile Saw
4 in. Cutting Wheel
Wheel Wrench (Hex Key)
Charger
Gravity Feed Water Bottle
Lithium Ion Battery Pack
Operator's Manual
wARNiNG:
If any parts are damaged or missing, do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
7 — English