Symbols Used - Bell BOLIK 50 E US Livret D'emploi Et D'entretien

ENGLISH

1.1 - Symbols used

Standard graphic symbols are used on all machines in order to ensure complete safety of all parts of the log splitter.
As these symbols are very important, read the information below attentively.
It's necessary to read carefully the entire use and
maintenance manual of the machine, before using it
it is obligatory to wear safety footwear at all times to
provide protection against the risk of logs accidentally
falling on feet.
it is obligatory at all times to wear gloves which protect
the hands against chips and splinters which may be
produced during work.
it is obligatory at all times to wear goggles which protects
the eyes against chips and splinters which may be
produced during work.
The log splitter must be used by one person alone.
it is forbidden to stand in the range of action of the
machine. apart from the operator, no other person or
animal may be present within a radius of 5 metres from
the machine.
Dumping of used oil in the environment is forbidden. The
oil must be disposed of according to current legislation
in the country where this operation is carried out.
Danger of cutting or crushing of the hand: never touch
hazardous areas while the wedge is moving.
D22000630 v.1 - UPD 291209
Warning: always pay attention to the movement of the
log pusher.
Warning: never remove a log trapped in the wedge
with your hands.
Warning: Before carrying out any maintenance
operation described in this manual, disconnect the plug
of the machine.
Warning: voltage as indicated on the rating plate
Direction of rotation of the motor. If the motor runs
in the wrong direction, follow the instructions
given in chapter 4.2, page 20.
Hitch point
Machines fitted with electrical parts must not be
disposed of as general waste and must be separated
for disposal as separately collected fractions,
deposited at authorised collection points.
17