Service Number Setting Screen; Dose Change Activation Screen; Continuous Dose Activation Screen; Led Rgb Cup Tray Lighting Activation Screen - SM TOP 85 Serie Traduction De La Version Originale Du Mode D'emploi

10.5 Service number setting screen

Screen 20
SERVICE PHONE

10.6 Dose change activation screen

Screen 21
DOSES SETTING
ENABLE

10.7 Continuous dose activation screen

Screen 22
CONTINUOS DOSE
ENABLE

10.8 LED RGB cup tray lighting activation screen

Screen 23 a
LED DISABLE
Screen 23 b
LED ENABLE
56
Service number technical level programming screen.
This technical level programming screen is used to set the ser-
vice number.
Move using the  /  buttons and change the number with the
+ / - buttons.
Default setting : XXXXXXXXXXX
Press OK to confirm the change.
Press NEXT to go to the next screen.
If no button is selected within 30 seconds, the machine ready screen
will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
Dose change activation technical level programming screen.
This technical level programming screen is used to activate or deac-
tivate the possibility to adjust doses.
Use the + / - buttons to activate or deactivate the possibility of pro-
gramming the doses. Press OK to confirm the change.
Default setting : ACTIVE
Press NEXT to go to the next screen.
If no button is selected within 30 seconds, the machine ready screen
will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
Continuous dose activation technical level programming screen.
This technical level programming screen is used to activate or deac-
tivate the possibility of dispensing continuous doses with the units.
Use the + / - buttons to activate or deactivate the possibility of dis-
pensing continuous doses. Press OK to confirm the change.
Default setting: ACTIVE.
Press NEXT to go to the next screen.
If no button is selected within 30 seconds, the machine ready screen
will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).
lED RgB cup tray lighting activation technical level program-
ming screen.
This technical level programming screen is used to activate or deac-
tivate cup tray lighting.
Use the + / - buttons to activate or deactivate cup tray lighting. Press
OK to confirm the change.
Default setting: ACTIVE.
Press NEXT to go to the next screen.
If no button is selected within 30 seconds, the machine ready screen
will appear automatically (screen 2).
Pressing ESC returns to the machine ready screen (screen 2).