Starting The Coffee Machine; Technical Characteristics - SM TOP 85 Serie Traduction De La Version Originale Du Mode D'emploi

• Any changes carried out on the machine and/or failure to carry out the scheduled maintenance will
release the Manufacturer from any liability for any resulting damages and voids the conformity declaration
and the warranty.
• Unauthorised operations or operations whose methods of execution are not exactly clear or unauthorised
interventions on the machine are strictly prohibited; contact the manufacturer for any information, spare
parts or accessories that you may need.
• Should the appliance be moved outdoors or to premises where the temperature might drop below 0°C, it
is vital that the exchangers circuit be emptied, cutting off the water supply to the appliance and draining
all water from the units until they only emit steam. Omitting to perform this procedure could lead to the
exchangers breaking, due to the water inside them freezing.
• For a proper disposal of the machine when it is to be discarded, contact the supplier or the authorized
firms specialized in the collection and disposal of solid urban waste. Do not discard the appliance in
the environment.
• La San Marco S.p.A. reserves the right to make any technical changes on the machine considered nec-
essary without advance notice.

1.3 Starting the coffee machine

Ambient temperature:
Water pressure:
Water hardness:
Noise level emitted by the machine: The weighted sound pressure level A is below 70 db(A), under normal
conditions of use of the machine.

1.4 Technical characteristics

N°
MODEL
GR.
TOP 85 SPRINT
2
TOP 85 SPRINT
2
10 L
2
TOP 85
3
4
Standard:
• Automatic level control (automatic charging of
water in boiler) on all models.
• External pump (300 W) for 2/3/4 unit models.
• Internal pump (275W) for SPRINT models.
• Stabilized temperature group (TOP 85 DTC)
5 ÷ 45° C (drain the water system in case of frost)
80 ÷ 800 kPa (0.8 ÷ 8.0 bar)
less than 5° fH
POWER INPUT (W)
BOILER HEATING ELEMENT
BOILER
CAPACITy
(L)
MONO- THREE-
PHASE PHASE
5 3000 4500
10 2800 4200
3500
12 3500
4500
5500
19 5500
7000
7000
25 -
9000
WEIGHT
MOTOR CUP HEATER (kg)
PUMP (Optional)
275 - 56
275 - 56
300 100 60
300 125 74
300 150 85
On request:
• Electrical cup heater (only models with 2/3/4
groups).
• Water softener (manual or automatic).
• Internal pump (275W) for 2/3/4 unit models.
• Cappuccino maker.
• Autosteam
• Water inlet volume counter
• Stabilised temperature unit (TOP 85 DTC)
A (mm) B (mm) C (mm)
630 545 470
630 545 470
720 545 470
960 545 470
1200 545 470
39