Impact Absorbing Chest Pads - Britax Emblem Guide D'utilisation

BRITAX Child Safety, Inc.

Impact Absorbing Chest Pads

IMPORTANT: Impact absorbing chest pads are highly
recommended for forward-facing mode. Removal of
chest pads is optional for rear-facing mode to ensure a
snug fit for small infants.
Removing the Impact Absorbing Chest Pads
1. Loosen the harness.
a. Lift harness adjuster
lever.
b. Pull both harness
straps forward.
2. From the back of the
seat, unhook the harness
straps from the yoke.
NOTE: Do not pull
adjuster strap after
removing harness straps
from yoke.
3. Pull one harness strap
through the harness slot
to the front of the seat.
4. Route the harness strap
out of the comfort pad,
chest pad, and the chest
clip.
5. Reroute the harness
strap back through the
chest clip, ensuring that
the harness strap is not
twisted.
6. Repeat for other strap.
7. Route the harness straps
through the seat to the
back. Ensure that the
harness straps pass
through the harness
adjuster.
38
1b
1a
EMBLEM/ALLEGIANCE Canadian User Guide
8. Nest the end of the right
harness strap into the left.
9. Hook the harness straps
onto the yoke. Ensure that
the harness straps are not
twisted and that the ends
of the harness straps are
securely attached to the
yoke.
IMPORTANT: Store the
chest pads in a safe
location when not in use.
Replacing the Impact Absorbing Chest Pads
1. Loosen the harness.
a. Lift harness adjuster
lever.
b. Pull both harness
straps forward.
2. From the back of the
seat, unhook the harness
straps from the yoke.
3. Pull one harness strap
through the harness slot
to the front of the seat.
4. Route the harness strap
out of the comfort pad
and chest clip.
5. Reroute the harness strap
through the chest pad,
chest clip, and comfort
pad.
6. Repeat for other strap.
1b
1a
39