Vehicle Compatibility; Vehicle Seating Positions - Britax Emblem Guide D'utilisation

Masquer les pouces

Table des Matières

Les langues disponibles

BRITAX Child Safety, Inc.

To remove the tether from a tether anchor:

1. Loosen the tether.

a. Tilt the adjuster tab up.

b. Pull the tether webbing.

2. Remove the tether hook

from the tether anchor.

NOTE: The tether carry clip is

only for use when you wish to

carry the child seat between

locations. When used as a

carry strap, tighten until the

strap is comfortable to carry.

Do not install the child seat

with the tether attached to

the carry clip.

Secure the excess tether webbing in the elastic strap during

use. Store the tether in the storage pouch when not in use.

Always ensure any excess webbing is contained within your

vehicle.

The Tether as a Crash Indicator

The tether can indicate when the child seat has been in a

moderate or severe crash (see "Important Notes" on page 5)

and replacement of the child seat is necessary.

Figure 1 shows a tether

acceptable for continued use

(provided the child seat has not

been involved in a crash). The

colored stitching will be intact

and not visible from the back of

the seat.

Figure 2 shows examples

of when the tether has been

damaged and is unacceptable

for continued use. If one or

both of the loops have pulled

through the back of the shell

and/or any of the colored

stitching has ripped, the child

seat is no longer acceptable for

use.

IMPORTANT:

Discontinue use of child seat if it has been

involved in a moderate or severe crash, regardless of

whether the loops have pulled through the back side of

the shell and the colored stitching has been ripped.

EMBLEM/ALLEGIANCE Canadian User Guide