BRITAX Child Safety, Inc.
7. Route the harness straps
through the seat to the
back. Ensure that the
harness straps pass
through the harness
adjuster.
8. Nest the end of the right
harness strap into the left.
9. Hook the harness straps
onto the yoke. Ensure that
the harness straps are not
twisted and that the ends
of the harness straps are
securely attached to the
yoke.
40
EMBLEM/ALLEGIANCE Canadian User Guide
Cleaning
Shell
• SPONGE CLEAN the
shell using warm water
and mild soap.
• TOWEL DRY
Cover
• HAND WASH the
cover using cold water
and mild soap.
• LAY FLAT to prevent
the cover from
shrinking.
Harness
• SPONGE CLEAN the
harness using warm
water and mild soap.
• TOWEL DRY
Harness
• THOROUGHLY RINSE
Buckle
the buckle using warm
water.
• TEST THE BUCKLE
by fastening and
unfastening until a
click is heard after
inserting each buckle
tongue. If clicks are
not heard, repeat the
cleaning procedure.
• TOWEL DRY
Anti-
• HAND WASH the anti-
Rebound
rebound bar cover
Bar
using cold water and
mild soap.
• LAY FLAT to dry.
DO NOT
• Use abrasive
cleaners.
DO NOT
• Bleach
• Machine wash
• Machine dry
• Iron
DO NOT
• Disassemble the
harness
• Bleach
• Machine wash
• Machine dry
• Iron
DO NOT
• Soak
• Lubricate
• Use solvents
• Use soap or
household
detergents
DO NOT
• Disassemble
• Bleach
• Machine wash
• Machine dry
• Iron
41