Publicité
Output Signals Connection
Relay outputs: Single contact (Rating: 1A 48Vac/dc)
The HV1,2,3 output contacts will be Closed when the HV is ON (relay
ON) and Open when the HV is OFF (relay OFF). The Fault output
contact (N.C.) will be Open in Fault condition (relay OFF) and Closed
in normal operation (relay ON)
SERIAL Operation
The Controller works on RS232 DCE Mode (like a Modem with DB9
FEMALE connector).
The Host/Terminal/Personal Computer works always on RS232 DTE
Mode (like a PC with DB9 MALE connector).
The Cable Interconnections are 1 to 1 signals (DB9 Male/Female
Standard CABLE).
Ion Pumps Control Unit (No Battery) User Manual / 87-900-116-01 (E)
Technical Information
ION Pump Controller Description
5
87/101
Publicité
Chapitres
