4
Installation Procedure
Error Messages
On "Remote" Connector on Rear Panel
"Fault" output: N.C. contact =
"HV 1,2,3" output: N.O. contact =
Outputs relays rating: 1 A 48 Vac/dc
80/101
The contact is Open in normal operation (relay ON)
The contact is Closed in " Fault" condition (relay OFF)
The contact is Open with HV Off (relay Off)
The contact is Closed with HV On (relay On)
Ion Pumps Control Unit (No Battery) User Manual / 87-900-116-01 (E)