Publicité
5
Technical Information
ION Pump Controller Description
ION Pump Controller Description
The Ion Pump controller is composed of a number of printed circuit
boards:
Controller Specifications
Tab. 3
Line:
Voltage
Frequency
Power
Operating conditions:
Internal use only
Max Altitude:
Max Line Voltage variation:
Installation category:
Pollution degree:
External Battery specifications
Output for the pumps:
With Line Supply:
Output Voltage (each channel)
Output Current (each channel)
Maximum Output Power (each channel)
82/101
1 board: (Power Supply), it converts the Line Voltage to the 24
Vdc that is used to generate the HV
1 board: (Auxiliary Power Supply), it generates the + and – 12
Vdc for the analog circuitry, the 5 Vdc for the digital circuitry.
3 boards: (HV generation), they generate the HV for the 3 output
channels
1 board: (CPU), it contains all the digital circuitry and the
microprocessor.
Ion Pumps Control Unit (No Battery) User Manual / 87-900-116-01 (E)
100 - 240 Vac
50 / 60 Hz
200 VA
3000 m
± 10 %
II
2
12 Vdc 24 Ah Lead Acid Type
-5000 Vdc +1, -5 %
>30 mA ± 10 %
40 W
Publicité
Chapitres
