Main Page; Setup; Troubleshoot - Osburn OP00030 Manuel D'opération

Main Page

Access to
programming
menu (internal use
only)
VX.XX (X)
VX.XX (X.XX)
0:00:00
X.XXX" H2O
X
X X

Setup

To change the display language, press ENG for English, FR for French and ES for
Language
Spanish.
Temperature To change the temperature unit, press on °F or °C.
COMB. ADJ The combustion adjustment allows you to change the default settings for the feed
rate (heat level), combustion and exhaust blowers. See «Fuel Quality Adjustment»
section for details.
PILOT ADJ The pilot adjustment allows you to change the default settings for the rotary valve
motor, combustion and exhaust blowers when the unit is in pilot mode. See «Fuel
Quality Adjustment» section for details.
Press exit to return to the previous screen.
Exit

Troubleshoot

Page 1 Displays the program version of the two electronic boards of the stove, the total
number of hours of operation of the stove, the static pressure in the chimney and
the temperature of the exhaust gas.
Pages 2 and 3 Displays statistics on the number of times a specific error code has occurred.
Pages 4 to 6 Displays the state of the stove main components.
Page 7 Change the operating time of the blowers after the unit is shut down. Also used to
update the electronic boards program.
Operation Manual - 3000
DEMO
Demo mode
of the unit
Main page, control setting menu
Allows to adjust
the combustion and
pilot parameters
Page 11