Recommended Tools
Universal brush
Scraper
Steel brush
Round brush + rod
Glass cleaner
Ash vacuum
Burn Pot
The burn pot must remain clean and the holes must not be obstructed by residues of combustion.
To clean it, vacuum the ashes and use a scraper, if necessary. Two small tenons guide the pot in place.
Simply lift it to remove it. When it is reinstalled, it must be pushed back in place before restarting the
stove.
If necessary, carefully vacuum combustion residues under the combustion pot, around the igniter.
Remove and empty burn pot
Scrape, if necessary
Page 22
Operation Manual - 3000