Shutting Down Procedure; Signs Of An Overheating Stove - Osburn OP00030 Manuel D'opération

Refueling
When the stove is running, the hopper lid can be opened
for refueling for three minutes before displaying an error
message. Opening the hopper lid will stop the rotary valve
from feeding the pellet stove.
If the hopper lid is left open for more than 3 minutes, the
message «HOPPER LID OPEN» will appear. To restart the
stove, close the lid and press «RESET», then press the start
icon on the home page.
WARNING, HOT ! USE GLOVE TO OPEN HOPPER LID.
THE HOPPER LID MUST BE CLOSED AT ALL TIMES EXCEPT WHEN REFULING.
DO NOT OVERFILL THE HOPPER.

Shutting Down Procedure

To turn off the stove, press the stop icon on the homepage. The cooling cycle will take a few minutes
and the blowers will continue to run while the stove cools down.
NEVER UNPLUG THE POWER CORD TO TURN OFF THE STOVE.

Signs of an Overheating Stove

If any external part of the stove begins to glow red,
the stove is overheating. Immediately turn the stove
off.
door.
features of the stove.
Choosing a stove that is too small for the house in which it is installed may cause the stove to
overheat since it will have to operate at maximum setting for most of the time to achieve a comfortable
temperature. The life expectancy of the components and the stove will be reduced.
Under normal conditions, the flame must have a bright yellow color, be very active and stable. If the
flame becomes lazy, very high and orange, it is a sign of malfunction.
Usually, overheating issues are caused by too much restriction in the venting system, a blocked heat
exchanger, a lack of combustion air or a lack of maintenance.
In this case, the stove will become very hot. If the stove gets too hot, the message «UNIT OVERHEAT»
will appear on the display.
Operation Manual - 3000
Do not unplug it and do not open the
Unplugging the stove will disable all the safety
Screen « Hopper lid open »
Page 19