Safety; Important Safety Instructions For Using Nailers; Important Safety Instructions - Hitachi NT50AGF Mode D'emploi Et Consignes De Sécurité

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English

IMPORTANT SAFETY INSTRUCTIONS

FOR USING NAILERS
READ ALL INSTRUCTIONS
1. OPERATORS AND OTHERS IN WORK AREA MUST WEAR
SAFETY GLASSES WITH SIDE SHIELDS.
both from the front and side.
The employer must enforce the use of safety glasses by the
Nailer operator and others in work area.
2. NEVER USE OXYGEN OR OTHER BOTTLED GASES.
EXPLOSION MAY OCCUR.
3. NEVER POINT TOOL AT YOURSELF OR OTHERS IN WORK AREA.
Respect the Nailer as a working implement.

SAFETY

DANGER
When operating the Nailer, always wear
eye safety glasses with side shields, and
make sure others in the work area wear
safety glasses, too.
Safety glasses must conform to the
requirements of American National
Standards Institute, ANSI Z87.1 and
provide protection against flying particles
Never use oxygen, combustible gases or
any other bottled gases as a power source
for the Nailer.
Use of the above gases is dangerous, as
the Nailer will explode.
Use only clean, dry, regulated compressed
air.
WARNING
Always assume the Nailer contains
fasteners.
Never point the Nailer at yourself, toward
yourself or others whether it contains
fasteners or not.
If fasteners are mistakenly driven, it can
lead to severe injuries.
Never engage in horseplay with the Nailer.
— 4 —

Publicité

Table des Matières
loading

Table des Matières