Getting Started; Unpacking; Hookup - Sony SA-PSD5 Mode D'emploi

Getting Started

You can connect this system to
"PlayStation 2" and enjoy the surround
sound.
This system can also be connected to
other audio/video components such as a
DVD player, CD player or VCR.
Be sure to turn off the power of each
component before making the
connections.

Unpacking

Check that you have the following items:
• Subwoofer (1)
• Satellite speakers (5)
• Speaker cords (5 m (17 ft) x 3, 15 m (50 ft) x 2)
• Optical digital cord (1)
• Remote commander (remote) RM-UP51 (1)
• R6 (size AA) batteries (2)
• Foot pads (20)
Inserting batteries into the remote
You can control the system using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and –
on the batteries. When using the remote, point it at the
remote sensor on the system.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting
apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
GB
4

Hookup

Speaker installation
For best performance, we recommend speaker placement
as shown.
You can use any satellite speakers for the front, center, and
rear speakers.
Subwoofer
Can be placed anywhere.
Center speaker
Place on the top of or below the
TV.
Rear speakers
Place right beside or slightly
behind your listening position,
and a little higher than your ears.
Front speakers
Place on both sides of the TV
equal distances apart.