Using The Setup Display; Using The Sleep Timer - Sony SA-PSD5 Mode D'emploi

Playing the Disc on the DVD Player

Using the setup display

You can operate the setup display of the DVD player.
1
Press DISPLAY.
The setup display appears on the TV screen.
2
Press </, to select the setup item, then press
ENTER.
3
Press M/m to select the item you want to change,
then press ENTER.
4
Change the item setting.
To return to the previous display
Press RETURN.
14 GB

Using the Sleep Timer

You can set the system to turn off automatically at a
specified time.
SHIFT
1
While pressing SHIFT, press SOUND FIELD (SPEAKER
SETUP).
Each time you press SOUND FIELD (SPEAKER
SETUP), the parameter is selected and displayed in the
following order.
<< SETUP >> (Setup mode) T
r
SLEEP OFF (Sleep timer setting mode)
r
S. W.
r
F.DIST.
r
C.DIST.
r
R.DIST.
r
R.PL.
r
R.HGT.
2
While HOUR, MIN and SEC indications are flashing,
set the desired time by pressing VOLUME +/–
together with SHIFT.
Each time you press VOLUME +, the time is extended
up to 9.00.00 (9 hours) by 30 minutes.
Each time you press VOLUME –, the time is shortened
up to OFF (timer off) by 30 minutes.
3
If you do not operate the remote for a few
seconds, the time indication stops flashing and the
timer is set.
While the sleep timer is activated, SLEEP appears on
the front panel display.
z
You can check the time remaining before the system turns
off
While pressing SHIFT, press SOUND FIELD (SPEAKER SETUP)
twice. The remaining time appears on the front panel display.
Note
When the power is turned off, the sleep timer setting is cleared.
SOUND FIELD
(SPEAKER SETUP)
VOLUME +/–