Sony SA-PSD5 Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
Speaker Setup
Parameters
The following are the parameters. The default settings are
underlined.
xS.W.
Set whether you output the sound from the subwoofer or
not.
• YES: Normally select this.
• NO: If you will not output the sound from the
subwoofer, select this.
xF. DIST.
Set the distance from the front speakers to the listening
position.
Front speaker distance can be set in 0.2-meter (1-foot)
steps from 1 to 15 meters (3 to 50 feet). The default figure
is 5 meters (17 feet).
xC. DIST.
Set the distance from the center speaker to the listening
position.
Center speaker distance can be set in 0.2-meter (1-foot)
steps from a distance equal to the front speaker distance
to a distance 1.6 meters (5 feet) closer to the listening
position. The default figure is 5 meters (17 feet).
xR. DIST.
Set the distance from the rear speakers to the listening
position.
Rear speaker distance can be set in 0.2-meter (1-foot) steps
from a distance equal to the front speaker distance to a
distance 4.6 meters (15 feet) closer to your listening
position. The default figure is 3.4 meters (12 feet).
Note
If the front or rear speakers are not placed an equal distance from
your listening position, set the distance of the closer speaker.
GB
8
xR.PL.
Specify the position of the rear speakers, behind or side.
• BEHIND
Select this if the rear speakers are located in section B.
• SIDE
Select this if the rear speakers are located in section A.
A
B
xR.HGT.
Specify the height of the rear speakers.
• LOW
Select this if the rear speakers are located in section D.
• HIGH
Select this if the rear speakers are located in section C.
C
D
90°
A
45°
B
20°
C
60
D
30

Publicité

Table des Matières
loading

Table des Matières