Using A "Memory Stick; About A "Memory Stick - Sony VPL-HS1 Mode D'emploi

Using a "Memory Stick"

This section describes how to view the still images
that are recorded by a digital camera and stored in a
"Memory Stick." You can make a slide show using
the images, display an index screen of the images, etc.
About a "Memory
Stick"
On "Memory Stick"s
"Memory Stick" is a new compact, portable and
versatile IC recording medium with a data capacity
that exceeds a floppy disk. "Memory Stick" is
specially designed for exchanging and sharing digital
data among "Memory Stick" compatible products.
Because it is removable, "Memory Stick" can also be
used for external data storage.
Types of "Memory Stick"s
There are two types of "Memory Stick"s: MagicGate
"Memory Stick"s that are equipped with the
MagicGate copyright protection technology and
general "Memory Stick"s. You can use both types of
"Memory Stick" with your projector. However,
because your projector does not support the
MagicGate standards, data recorded in the "Memory
Stick" is not subject to MagicGate copyright
protection.
On MagicGate
MagicGate is copyright protection technology that
uses encryption technology.
Format that can be displayed with this
projector
Image data recorded with a digital camera and
recorded on a Memory Stick in the following format:
Images (DCF-compatible) compressed in the JPEG
(Joint Photographic Experts Group) format
(extension: .jpg)
22

About a "Memory Stick"

GB
Before using a "Memory Stick"
Terminal
Write-protect
tab
• You cannot rotate or erase still images when the
write-protect tab on the "Memory Stick" is set to
LOCK.
• We recommend backing up important data.
• Image data may be damaged in the following cases:
If you remove the "Memory Stick," turn the power
–
off, or detach the battery for replacement when the
access lamp is flashing.
If you use a "Memory Stick" near static electricity
–
or magnetic fields.
Notes
• Prevent metallic objects or your finger from coming into
contact with the metal parts of the connecting section.
• Do not attach any other material than the supplied label onto the
label space.
• Attach the label to the prescribed labeling position. Make sure
the label is attached to the labeling position properly.
• Do not bend, drop or apply strong shock to a "Memory Stick."
• Do not disassemble or modify a "Memory Stick."
• Do not let the "Memory Stick" get wet.
• Do not use or keep a "Memory Stick" in locations that are:
– Extremely hot such as in a car parked in the sun or under the
scorching sun.
– Under direct sunlight.
– Very humid or subject to corrosive gases.
• When you carry or store a "Memory Stick," put it in its case.
About formatting "Memory Stick"s
When "Memory Stick"s are shipped from the factory,
they are already formatted to a special standard
format. When you format "Memory Stick"s, we
recommend formatting them on this unit.
Caution when formatting "Memory Stick"s
on a personal computer
Pay attention to the following points when formatting
"Memory Stick"s on the personal computer, for
example, that you are using.
Operation of "Memory Stick"s formatted on the
personal computer is not guaranteed on this unit. To
use a "Memory Stick" that has been formatted on the
personal computer, the "Memory Stick" must be
reformatted on this unit. Note that in this case all data
stored on the "Memory Stick" will be lost.
Labeling
position