Selecting The Picture Viewing Mode - Sony VPL-HS1 Mode D'emploi

Selecting the
Picture Viewing
Mode
You can select the picture viewing mode that best
suits the type of program or room condition.
SIDE
SHOT VOLUME
+ +
INPUT
MS SLIDE
– –
APA
VIDEO MEMORY
DYNAMIC STANDARD LIVING
USER 1 USER 2 USER 3
OFF
MENU
ENTER RESET
Press one of the VIDEO MEMORY
buttons (DYNAMIC, STANDARD,
LIVING and USER 1, 2 and 3).
DYNAMIC
Select for enhanced picture contrast and sharpness.
STANDARD
Recommended for normal viewing condition in your
home.
Also select to reduce roughness when viewing the
picture with DYNAMIC.
16

Selecting the Picture Viewing Mode

GB
VIDEO MEMORY buttons
DYNAMIC
STANDARD
LIVING
USER 1, 2 and 3
OFF
LIVING
Select for soft, film-like picture.
USER 1, 2 and 3
You can adjust the quality of the picture to suit your
taste and store the settings into the selected memory
of the projector. Press one of the USER 1, 2 and 3
buttons, then adjust the picture by using the menus.
The settings are stored, and you can view the picture
with the adjusted picture quality by pressing the
button. (1 page 20)
OFF
Select for the setting stored in each input that can be
selected with the INPUT button, or each input signal.
Tip
You can select the picture viewing mode using the VIDEO
MEMORY button on the projector. Each press of the button
selects the above item.