To Delete Information Recorded On Memory Cards; To Copy Memory Card Data - Pioneer DVJ-1000 Mode D'emploi

Advanced Operations (Operations Using Memory Cards)
POWER
OFF ON
TIME AUTO
MODE CUE
TEXT MODE
DVD TITLE
MP3 FOLDER ANGLE SUBTITLE AUDIO
REALTIME CUE
HOT CUE RELOOP/
IN OUT
LOOP
IN ADJUST OUT ADJUST
BACK & FORTH
REC MODE
DIRECTION
FWD
REV
PREVIOUS NEXT
REV FWD
CUE
PLAY/PAUSE
REV
To delete information recorded on
memory cards
I To delete individual cue/loop points
1. Press the CUE/LOOP CALL button.
¶ The preview monitor screen will display the cue point navigation
menu.
2. Use the cursor button ( / / / ) to select the thumbnail
of the cue point you wish to erase, then press the DE-
LETE button.
¶ The display will show the "DELETE" message, and the selected
cue point or loop point data will be erased from the memory card.
I To delete all cue/loop point information for an
entire disc
1. Load the disc whose cue/loop point information you wish
to erase.
2. Hold the DELETE button depressed for 5 or more seconds.
¶ The display will scroll the "DISC DELETE? PUSH MEMORY" con-
firmation message.
3. Press the MEMORY button.
¶ All cue and loop data for the loaded disc will be deleted from the
memory card.
¶ If any button other than the MEMORY button is pressed, the de-
lete mode will be canceled.
I To delete all memory card data
1. With no disc loaded, hold the DELETE button depressed
for 5 seconds or more.
¶ The display will scroll the "ALL DELETE? PUSH MEMORY" con-
firmation message.
2. Press the MEMORY button.
¶ All data will be deleted from the memory card.
¶ If any button other than the MEMORY button is pressed, the de-
lete mode will be canceled.
46
En <DRB1414>
DELETE MEMORY
DVJ-1000
STOP
UNLOCK LOCK
EJECT
DISPLAY DELETE MEMORY MENU T.MENU RETURN SETUP
CUE / LOOP
4-BEAT TOUCH/BRAKE
EXIT ONE-TRACK CALL ENTER
JOG ADJUST RELEASE/START
LIGHT
HEAVY
CUE/LOOP
HYPERJOG MODE
CALL
JOG MODE
VINYL
WIDE
TEMPO
MASTER TEMPO
TEMPO
RESET
FWD
TEMPO

To copy memory card data

1. With no disc or memory card loaded:
Hold the MEMORY button pressed for 5 seconds or more.
¶ The display will scroll the "COPY MODE" "CARD A IN" mes-
sages.
2. Insert the original source memory card into the memory
card slot.
¶ The display will show the "READING" message; after several min-
utes, the "CARD B IN" message will appear.
3. Remove the source card and insert the target memory
card.
¶ Be sure to delete earlier contents of the target card to provide
sufficient recording capacity.
¶ The display will show the "WRITING" message, and after several
minutes, the "CARD A IN" message will appear.
4. Remove the target card, and once more insert the origi-
nal source card.
¶ The display will show the "READING" message; after several min-
utes, the "CARD B IN" message will appear.
5. Repeat steps 3 and 4 as required.
¶ The copying process is completed when the display shows the
"COMPLETE" message.
¶ Copying of a full 32 MB memory card will require a maximum of 3
cycles of recording steps 3 and 4.
¶ If the target card has insufficient memory capacity to complete
the copying process, the "CAPACITY ERROR" message will ap-
pear.
¶ If you possess a computer with memory card reader, the reader can
be used to copy your memory cards. (A computer cannot be used to
copy Multimedia cards (MMC) formatted with the CDJ-1000 or CDJ-
1000MK2.)
P.43, precautions regarding memory card formatting.