To Recall Data Recorded On Memory Cards - Pioneer DVJ-1000 Mode D'emploi

Advanced Operations (Operations Using Memory Cards)
POWER OFF ON
TIME AUTO
MODE CUE
TEXT MODE
DVD TITLE
MP3 FOLDER ANGLE SUBTITLE AUDIO
HOT CUE
REALTIME CUE
HOT CUE
IN OUT
A
LOOP
IN ADJUST OUT ADJUST
B
BACK & FORTH
REC MODE
C
HOT CUE
DIRECTION
FWD
REC MODE
REV
PREVIOUS NEXT
REV FWD
CUE
PLAY/PAUSE
REV
I Message displays during recording of cue and loop points
Player display
"CARD MEMORY"
"CANNOT MEMORIZE ON THIS CARD"
"CARD FULL"
"CARD PROTECTED"
"INTERNAL MEMORY", followed by
"NO CARD"
"INTERNAL MEMORY", followed by
"CLOSE CARD DOOR"
"UNFORMAT"
"CARD ERROR"
"POINT FULL"
"CARD MEMORY", followed by
"PICTURE IS NOT RECORDED"
Insert memory card whenever recording cue point data, loop point data, hot cue data, or WAVE data. If no memory card is inserted, any designated
setting data will be lost when the power is turned off or the disc is removed.

To recall data recorded on memory cards

I To recall a recorded cue or loop point
1. Press the CUE/LOOP CALL button.
¶ The preview monitor screen will display the cue point navigation
menu.
44
En <DRB1414>
MEMORY
DVJ-1000
STOP
UNLOCK LOCK
EJECT
DISPLAY DELETE MEMORY MENU T.MENU RETURN SETUP
ENTER
RELOOP/ 4-BEAT CUE / LOOP TOUCH/BRAKE
EXIT ONE-TRACK CALL ENTER ENTER
JOG ADJUST RELEASE/START
LIGHT
HEAVY
CUE/LOOP
HYPERJOG MODE
CALL
JOG MODE
VINYL
WIDE
TEMPO
MASTER TEMPO
TEMPO
RESET
FWD
TEMPO
Cue point or loop point data have been successfully recorded on the memory card.
Displayed during DVD/MP3 playback, when a memory card formatted and recorded using the CDJ-
1000 or CDJ-1000MK2 has been loaded on this unit and an attempt is made to record data to the card.
Point data cannot be recorded.
Insufficient space remains on the memory card. Point data cannot be recorded to the card.
The memory card's LOCK (write protect) function is enabled, and further point data cannot be recorded
on the card.
No memory card is loaded.
A memory card is loaded, but the memory card door has not been closed. Close the door and retry.
Displayed when the loaded memory card does not conform to SD memory card standards, or has not
been formatted to CDJ-1000 or CDJ-1000MK2 (MMC) standards. Point data cannot be recorded on
the card.
The loaded memory card appears to be damaged.
Displayed when the total number of recorded cue points and loop points has already reached 100.
Displayed when an attempt is made to record points from a copy-protected disc. Thumbnail image is
not recorded.
I Recording a loop point
1. Set a loop-in point and loop-out point and begin loop play-
back.
2. During loop playback, press the MEMORY button.
¶ The display will show the cue point position data, and the word
"CARD MEMORY" will appear in the display, indicating that the
loop-in and loop-out points have been stored in the memory card.
¶ If no memory card is loaded, the "NO CARD" message will ap-
pear.
¶ If the memory card door is open without any memory card being
loaded, the message "CLOSE CARD DOOR" will appear in the
display.
I Recording hot cue points A, B, C
Hot cue points A, B, and C are automatically recorded on the memory
card.
I WAVE display
Wave displays are automatically recorded on the memory card.
* As one example of the use of a 32 MB SD memory card, up to 75
discs' worth of cue and loop points can be recorded per card (assum-
ing use of DVD discs with 20 points per disc, and recording of thumb-
nail images for each point).
Contents
CUE 1–006 0.00.39
A B C ENTER CALL
While the call screen is displayed,
point information is also shown
on the player's display.