Setup; Tv System Setting For Video Output; How To Perform Setup; Using The Setup Navigator - Pioneer DVJ-1000 Mode D'emploi

Setup

Initial setup is required before playing DVDs.

TV system setting for video output

This setting is used to switch the TV system used for video out-
put. Confirm on the following table the TV system format in which
each kind of disc will be output.
Player setting
AUTO mode
Disc type
DVD (NTSC) NTSC
DVD (PAL) PAL
CD or no disc NTSC or PAL
1. Set the player's POWER switch to OFF.
2. While depressing the DVD TITLE \ button, set
the power to ON.
3. Release the DVD TITLE \ button once the TV
system is shown in the display.
Each time steps 1 to 3 are repeated, the setting alternates as
follows:
PAL (factory default) = AUTO
AUTO = NTSC
NTSC = PAL
¶ Note that visual quality may deteriorate if the disc's record-
ing method differs from the TV system selected for out-
put.

How to perform setup

Setup operations are performed by first pressing the SETUP
button to display the Setup Menu on the screen; the cursor but-
ton is used to select items, and items are confirmed with the
ENTER button.
The cursor button contains four sensors ( / / / ) in a single
button. Press the top ( ), bottom ( ), left ( ) and right ( ) sides
of the button to move in the corresponding directions on the
screen.
Settings are performed via a "Setup Navigator" which uses a
dialog format to make basic settings of television and amplifier;
a "Setup Menu Mode" is used for individual settings. First press
the SETUP button to start the "Setup Navigator".
"Setup Menu Mode" includes "Basic" and "Expert"; the latter
mode allows more detailed settings.
MENU
OP
JOG ADJUST
POWER OFF ON
TIME AUTO
MODE CUE
TEXT MODE
DVD TITLE
MP3 FOLDER ANGLE SUBTITLE AUDIO
REALTIME CUE
HOT CUE
IN OUT
LOOP
IN ADJUST OUT ADJUST
BACK & FORTH
REC MODE
DIRECTION
FWD
NTSC mode PAL mode
NTSC PAL
NTSC PAL
NTSC PAL
T.MENU RETURN SETUP
TOUCH/BRAK
ENTER
RELEASE/STA
DVJ-1000
STOP
UNLOCK LOCK
EJECT
DISPLAY DELETE MEMORY MENU T.MENU RETURN SETUP
RELOOP/ 4-BEAT CUE / LOOP TOUCH/BRAKE
EXIT ONE-TRACK CALL ENTER
JOG ADJUST RELEASE/START
LIGHT
HEAVY
HYPERJOG MODE
JOG MODE
VINYL
WIDE

Using the Setup Navigator

The "Setup Navigator" uses a dialog format to make basic tel-
evision and amplifier settings. The various settings are made au-
tomatically as the user responds to displayed questions. The
Setup Navigator function cannot be used during playback.
When Setup Navigator is started, setup questions appear in the
following order:
Language (OSD Language) \ TV Connection (TV type) \ Amp
Connection
1. Set POWER switch to ON.
If a disc is already loaded, remove it.
2. Press SETUP button.
The Setup Navigator screen will appear.
Audio1 A2 Video1 V2 Language
Setup Navigator
Setup Navigator Start
Auto Start Off
Setup using the Setup Navigator
Move ENTER Select
Start:
Select to begin the Setup Navigator.
Auto Start Off:
Select if Setup Navigator settings are already completed.
¶ When [Auto Start Off] is selected, the next time the SETUP
button is pressed the manual Setup Menu will appear.
3. Press ENTER button.
The Setup Navigator is initiated.
I During setup, to return to the previous menu screen:
Press the cursor button's left side ( ).
Select On-Screen-Display (OSD) Language
Languages selectable include English, French, German, Italian,
or Spanish.
Press the cursor button's up/down sides ( / ) to
move the cursor to the language desired, then
press ENTER button to confirm.
Audio1 A2 Video1 V2 Language
Setup Navigator English
français
Deutsch
Language
Italiano
OSD Language
Español
Select the On Screen Language
Move Select
ENTER
English: OSD Language is English.
Français: OSD Language is French.
Deutsch: OSD Language is German.
Italiano: OSD Language is Italian.
Español: OSD Language is Spanish.
¶ The language selected as the OSD Language is automatically
selected as the language used in subtitles and audio. ( P. 26)
Preparations (Setup) Preparations (Setup)
General
SETUP Exit
General
Exit
SETUP
<DRB1414> En
17