Bluetooth Mobile Phone; Phone Book - JVC KD-DB95BT Manuel D'instructions

Bluetooth mobile phone

To Do this
Receive a call
Press
On RM-RK52: Press J / K / H / I /SOURCE.
• When [AUTO ANSWER] is set to the selected
time, the unit answers incoming call
automatically. ( 14)
Reject an incoming
Press and hold
call
On RM-RK52: Press and hold J / K / H / I /
SOURCE.
End a call
Press and hold
On RM-RK52: Press and hold J / K / H / I /
SOURCE.
Activate or deactivate
Press the volume knob during a call.
hands-free mode • Operations may vary according to the
connected Bluetooth mobile phone.
Adjust the phone Turn the volume knob during a call.
volume
Phone volume: [00] to [50] (Default: [15])
• This adjustment will not affect the volume of
the other sources.
Switch between two
Press
connected phones
• Not applicable during a call.
Improve the sound quality during a call
While talking on the phone....
1
Press and hold MENU.
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3
Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
or the volume knob.
or the volume knob.
or the volume knob.
repeatedly.
MIC LEVEL
–20 — +08 (0): The sensitivity of the microphone increases as the
number increased.
NOISE RDCT –05 — –20 (–10): Adjust the noise reduction level until the least
noise is being heard during a phone conversation.
ECHO CANCEL 1 — 10 (4): Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Bluetooth mode operations
1
Press to enter Bluetooth mode.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3
Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
1 Press the volume knob to select a name or a phone number.
RECENT CALL
• ">" indicates call received, "<" indicates call made, "M" indicates
call missed.
• "NO HISTORY" appears if there is no recorded call history or call
number.
2 Press the volume knob to call.
1 Turn the volume knob to select a name, then press the knob.
PHONEBOOK
2 Turn the volume knob to select a phone number, then press the knob to
call.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does
not support PBAP, "SEND P.BOOK MANUALLY" appears. Transfer the
phonebook manually. ( 15, P.BOOK WAIT)
• This unit can display only non-accent letters. (Accent letters such as "Ú"
is showns as "U".)
• If the phonebook contains many contacts, ( 14, Select a contact by
name).
BLUETOOTH®
Default: XX
ENGLISH | 13