Using A Bluetooth Mobile Phone; Making A Call - JVC KD-R711 Manuel D'instructions

Connecting/disconnecting a
registered device
1
[Hold]
2
] <BLUETOOTH> ] <CONNECT PH/
CONNECT AU> or <DISCONNT PH/
DISCONNT AU>.
• For connecting a device, go to step 3.
• For disconnecting a device,
"DISCONNECT" and "[Device Name]"
appear alternately on the display
when the device is disconnected.
3
] Select a device you want to connect.
• "CONNECTING" and "[Device Name]"
appear alternately, then "CONNECTED"
and "[Device Name]" appear
alternately on the display when the
device is connected.
Using a Bluetooth mobile
phone

Making a call

1
] Enter "Call Menu" screen.
2
] Select the method to make a call.
1
• DIALED * : Shows the list of the phone
numbers you have dialed. Go to the
following step.
1
• RECEIVED * : Shows the list of the
received calls. Go to the following step.
1
• MISSED CALL * : Shows the list of the
missed calls. Go to the following step.
2
• PHONEBOOK * : Shows the name/
phone number of the phonebook
registered in the unit or from the
connected phone *
following step.
– To copy the phonebook memory, <P.
BOOK WAIT>,
– If the phonebook contains many
numbers, you can fast search (±10,
±100, ±1000 numbers) through the
phonebook by turning the control
dial quickly.
– To search through the phonebook,
16.
• DIAL NUMBER: Shows the "Dial
Number" screen. (
• VOICE DIAL (only accessible when
the connected mobile phone has the
voice recognition system): Speak the
name (registered words) you want to
call when "SAY NAME" appears *
1
* "NO HISTORY" appears if there is no
history stored.
"NO DATA" or "SEND P. BOOK" j
2
*
"MANUALLY" appears depending on
the <P. BOOK SEL> settings.
3
* Depends on the <P. BOOK SEL>
settings, 19.
4
* Operations may be different according
to the connected device.
5
* "NOT SUPPORT" appears if the
connected phone does not support
this feature.
3
] Select the name/phone number you
want to call.
• When the sound is stopped or
interrupted during the use of a
Bluetooth device, turn off, then turn
on the unit.
– If the sound is not yet restored,
connect the device again using
<CONNECT PH>.
3
. Go to the
19.
16)
4, 5
* .
ENGLISH 15