Bluetooth Mobile Phone - JVC KD-X310BT Manuel D'instructions

BLUETOOTH®
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device connected.
1 Press and hold .
"BLUETOOTH" "CHECK MODE" appears. "SEARCH NOW USING
PHONE" "PIN IS 0000" scrolls on the display.
2 Search and select "JVC UNIT" on the Bluetooth device within
3 minutes.
3
Perform (A), (B) or (C) depending on what appears on the display.
(A) "PAIRING" "XXXXXX" (6-digit passkey): Ensure that the same
passkey appears on the unit and Bluetooth device, then operate
the Bluetooth device to confirm the passkey.
(B) "PAIRING" "PIN IS 0000": Enter "0000" on the Bluetooth device.
(C) "PAIRING": Operate the Bluetooth device to confirm pairing.
After pairing is successful, "PAIRING OK"
Bluetooth compatibility check starts.
If "CONNECT NOW USING PHONE" appears, operate the Bluetooth device
to allow phonebook access to continue.
The connectivity result flashes on the display.
"PAIRING OK" and/or "H.FREE OK"*
3
"PBAP OK"* : Compatible
*
1 Compatible with Hands-Free Profile (HFP)
* 2
Compatible with Advanced Audio Distribution Profile (A2DP)
* 3
Compatible with Phonebook Access Profile (PBAP)
After 30 seconds, "PAIRING DELETED" appears to indicate that pairing has
been deleted, and the unit exits check mode.
• To cancel, press and hold B /SOURCE to turn off the power, then turn
on the power again.
10
"[Device Name]" appears and
1 2
and/or "A.STREAM OK"* and/or

Bluetooth mobile phone

To Do this
Receive a call
Press
On RM-RK52: Press J / K / H / I .
• When [AUTO ANSWER] is set to the selected time, the
unit answers incoming call automatically. ( 11)
Reject an
Press and hold
incoming call
On RM-RK52: Press and hold J / K / H / I .
End a call
Press and hold
On RM-RK52: Press and hold J / K / H / I .
Activate or
Press the volume knob during a call.
deactivate
• Operations may vary according to the connected
hands-free Bluetooth mobile phone.
mode
Adjust the
Turn the volume knob during a call.
phone volume Phone volume: [00] to [50] (Default: [15])
• This adjustment will not affect the volume of the
other sources.
Switch between
Press
two connected
• Not applicable during a call.
phones
Improve the sound quality during a call
While talking on the phone....
1
Press and hold MENU.
2 Turn the volume knob to make a selection ( 11), then press the
knob.
3
Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
or the volume knob.
or the volume knob.
or the volume knob.
repeatedly.