Technical Data - EINHELL GE-LM 36/4in1 Li Mode D'emploi

Cordless telescoping pole chain saw
The cordless telescoping pole chain saw is
designed for cutting off branches from trees. It
is not suitable for extensive sawing work, cutting
down trees or sawing any materials other than
wood.
Cordless hedge trimmer
The cordless hedge trimmer is suitable for cutting
hedges, bushes and shrubs.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
Warning! This electric tool generates an
electromagnetic fi eld during operation. Under
certain circumstances this fi eld might actively or
passively impede medical implants. To reduce
the risk of serious or fatal injuries, we recommend
persons with medical implants to consult their
doctor and the manufacturer of the medical
implant prior to using the equipment.

4. Technical data

Motor power supply: .............. 36 V
CHAIN SAW:
Cutting thickness max: ................7.08 in. (18 cm)
Bar chain length: ........................... 8 in. (20.3 cm)
Chain pitch: ...................
Chain thickness: ......................0.043 in. (1.1 mm)
Saw chain: ...........................Oregon / 90PX033X
Cutter rail: .......................... Oregon 084LNEA041
Cutting speed at rated rpm: . 32.80 ft/sec. (10 m/s)
Oil tank capacity: ...................... 3.38 fl oz (100 ml)
HEDGE TRIMMER:
Blade length: ..............................20.07 in. (51 cm)
Cutting length: ............................17.71 in. (45 cm)
Cutting diameter max.: ................0.94 in. (24 mm)
Multi-angle head: ....-70°,-40°,-20°,0°,20°,40°,70°
Anl_GE_LM_36_4in1_Li_SPK7_USA.indb 24 Anl_GE_LM_36_4in1_Li_SPK7_USA.indb 24
EN
(2x18V)
/ in. (9.5 mm), 33 teeth
3
8
- 24 -
SRING TRIMMER:
No load speed: .......................... 6400 rpm (min
Cutting width: .................................13 in. (33 cm)
Dimensions trimmer line: ..................... 26 ft (8 m)
Line diameter: ...............................0.08 in. (2 mm)
BRUSH CUTTER:
No load speed: ........................... 6400 rpm (min
Cutting width: ...............................10 in. (25.5 cm)
Separately available accessories
18V 1.5Ah P-X-C lithium-ion battery
18V 2.0Ah P-X-C lithium-ion battery
18V 2.5Ah P-X-C lithium-ion battery
18V 3.0Ah P-X-C lithium-ion battery
18V 4.0Ah P-X-C lithium-ion battery
18V 5.2Ah P-X-C Plus lithium-ion battery
18V P-X-C Fast Charger
Explore battery + charger options at
einhellUSA.com
18V Power X-Change Fast Charger
Input ............................... 120 V A.C.~60 Hz, 40 W
Output ............................................... 20 V , 1.5 A
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment's construction and
layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
)
-1
)
-1
29.09.2021 09:33:54 29.09.2021 09:33:54