Dri-Eaz LGR 7000XLi Guide D'utilisation page 12

Stand the unit upright and remove the front cover as
described under "To disassemble the unit for cleaning coils
and heat exchange block," p. 8.
3
∕
Now remove the four rear panel in. bolts.
8
Tip the top of the rear panel away from the unit and lay
it flat in front of the unit. It is not necessary to disconnect
the wire harness from the rear panel or from the electrical
box.
Clean the horizontal cold (condenser) coil. Use a
vacuum or condenser coil cleaner. If using the coil cleaner,
use a small container to capture runoff from the drain basin.
07-01776D (F412 120V) 2013-01 Warranty 07-00420 12 Dri-Eaz Products, Inc.