Maintenance And Repairs; Dismantling The Machine - LaCimbali CM AUT Utilisation Et Installation

If the machine is not working properly, turn off the
machine, turn off the main off-on switch, and call
the service centre.
If the power-supply cord is damaged, switch off
the machine and request a replacement from the
service center.
To ensure safety during operation, it
is absolutely necessary to:
• follow all the manufacturer's instructions;
• have quali ed and authorized technicians
periodically check that all safety devices
are intact and functioning properly (the
rst inspection within three years of
purchase and every year after that).
8. Dismantling the machine (Only for products with the
Pursuant to European Directive 2012/19/UE on
electrical waste (WEEE), users in the Europe-an
community are advised of the following.
Electrical equipment cannot be disposed of as
ordinary urban waste: it must be disposed of
according to the special EU directive for the
recycling of electric and electronic equipment.

7. Maintenance and Repairs

repairs.
WARNING
Only use original spare parts guaranteed by
the manufacturer.
If original spare parts are not used, the
manufacturer warranty will no longer be valid.
environmentally friendly manner contributes
to avoiding possible negative effects on the
environment and health, and encourages the
reuse and/or recycling of the materials from which
the machine is made.
Improper disposal of electric equipment that fails
to respect the laws in force will be subject to
GRUPPO CIMBALI electrical equipment is
marked with a pictogram of a garbage. This
symbol means that the equipment was sold on
the market after August 13, 2005, and must be
disposed of accordingly.
6 EN
WARNING
jeopardize the safety and conformity of
the machine.
marking)
Suitable differentiated waste disposal so
that the machine can then be recycled,
treated and disposed of in an

DISMANTLING THE MACHINE

To protect the environment,
please proceed in compliance
with the local laws in force.