Setting The Timer; Wakeup Timer - Teac MC-D800 Mode D'emploi

At the set time, sound will be output from the speakers .
o Adjust the clock before setting the timer (page 25) .

Setting the timer

1 Put the unit into standby (power off).
The unit must be in standby to set the timer .
Press the STANDBY/ON button to put the unit into
standby .
2 Press and hold the TIMER button for at
least two seconds.
Press and hold for at
least 2 seconds
The timer indicator ( ) blinks and "SET TIMER"
scrolls across the display once . "ON TIME" appears
and then the time input mode becomes active .
56

Wakeup timer

Display example
The "hour" value blinks .
o If no action is taken for 20 seconds, timer setting
will end automatically .
c
c