When Playback Finishes - Teac MC-D800 Mode D'emploi

8 Slowly lower the cue lever to slowly
lower the tone arm.
Tone arm
o During record playback, you can close the turn-
table cover to avoid dust .
V Do not place anything on the turntable cover.
Objects on the cover might cause noise due
to vibrations or fall off, especially during
playback.
During record playback, feedback could occur if
the volume is too loud . If this happens, turn the
VOLUME knob left to lower the volume .

When playback finishes

When the end of the record is reached, the tone arm
automatically returns to the tone arm holder and turn-
table rotation stops (auto return function) .
o To stop playback manually, slightly lift the tone arm
using the cue lever or a finger and return the tone
arm to the tone arm holder .
Cue lever
The auto return function might not work depend-
ing on the record . In that case, move the tone arm
back to its original position manually .
Tone arm
Cue lever
47