Teac MC-D800 Mode D'emploi page 46

3 Place a record on the turntable.
When playing a 45 RPM large-hole single record,
use the included adapter .
4
Set according to the rotation speed
(RPM) of the record.
The rotation speed can be set to one of three
options: 33 1/3, 45 or 78 .
5 Move the tone arm clasp to the right to
release the tone arm.
Clasp
46
Listening to records (continued)
6 Lift the cue lever to raise the tone arm.
Tone arm
o You can also leave the cue lever down and move
the raised tone arm over the record and then
lower the tone arm slowly to start playback .
7 Move the tone arm to the edge of the
record or the track where you want to
start playback.
When you move the tone arm toward the record,
the turntable will begin to turn .
Cue lever