Teac MC-D800 Mode D'emploi page 26

6 Press the CLOCK ADJUST button.
Display example
The minute value blinks .
7 Press the TIME (j/k) buttons to set
the current minute.
8 Press the CLOCK ADJUST button.
This completes the procedures for setting the time .
The clock will start from the set minute at 0 seconds .
o The unit's clock and wakeup timer settings will be
erased if a power outage occurs or the power cord is
unplugged from an outlet .
26
Setting the clock (continued)
Current time display
The clock is always shown when the unit is in standby
mode (off ) and when the function is set to PHONO/
AUX .
Press the remote control's DISPLAY button to show the
clock on the display .
o The current time is shown for three seconds in CD/
USB and FM/AM modes .
Display example
o The DISPLAY button does not function in AUX/
PHONO and Bluetooth modes .
o In Bluetooth mode, the current time is only shown
when paired .
Current time