Setting The Clock - Teac MC-D800 Mode D'emploi

Set the current time before using the unit .
1 Press the STANDBY/ON button to put
the unit into standby.
NOTE
The clock can also be set when the unit is on, but
not when the unit is in radio, CD or USB mode .
2 Press and hold the CLOCK ADJUST but-
ton for at least two seconds.
Press and hold for at
least 2 seconds
"SET CLOCK" scrolls across the display .
3
Press the TIME (j /k ) buttons to
switch between 24 HOUR and 12 HOUR
(24-hour or 12-hour time display).

Setting the clock

o If a setting is left for more than 20 seconds, this
time setting mode will end .
4 Press the CLOCK ADJUST button again.
Display example
The "hour" value blinks .
5
Press the TIME (j/k) buttons to set
the current hour.
c3
Continued on the next page
25