Bartscher GE 18 Mode D'emploi page 32

Cleaning the spout
o When the device is used daily the spout should be thoroughly cleaned once a week,
or less often when the device is not in regular use.
o Unscrew the spout lever and wash it in warm water with a mild cleaning agent, then
rinse with clean water. Use a small brush for bottles to clean the inside of the spout,
then pour a small amount of water through it. Replace the lever on the spout.
Descaling
o Hard water may cause stone deposits to form in the water tank, lengthening the time
needed to heat water and possibly causing damage to the device. Use filtered water
if possible to avoid deposits forming!
CAUTION!
Failure to conduct regular descaling in accordance with these instructions may
void the warranty and result in returns being rejected!
Descale the device regularly!
o We recommend using citric acid or vinegar for ecological descaling. Prepare a
mixture of water with vinegar (proportion 3:1) or water with citric acid (2 table-
spoons per 1 liter of water) and fill the tank. Wait for one hour then boil the water.
o Wait for the device to cool. After cooling, pour out the descaling solution and rinse the
device several times with clean water. Drain the clean water through the pour spout
to remove all leftovers.
o Follow manufacturer's instructions if you choose to use a commercially available
descaling product.
o After longer breaks in the device's use, clean and descale it according to the
instructions given above. Store the power cord in the base of the device. Store the
device in a well-ventilated, dry, clean place safe from frost and sunlight, inaccessible
to children.
- 31 -