Important Notes; Applications - Monacor TVCCD-1622COL Mode D'emploi

on the last camera of the control cable to ON, the
GB
switch on the other cameras to OFF.
10 Terminals for the 12 V power supply (400 mA)
11 Adapter with thread jack [6.3 mm (
installing the camera

2 Important Notes

The camera corresponds to all required directives of the
EU and is therefore marked with
The camera is suitable for indoor use only. For outside
installation, it must be mounted into a weatherproof out-
door housing. Protect the camera against intensive
vibration, humidity, and heat (admissible ambient tem-
perature range 0 – 40 °C).
For cleaning the housing only use a dry, soft cloth; never
use chemicals or water.
Never touch the lenses of the lens assembly with your
fingers. For cleaning only use specific cleaners for opti-
cal lenses.
No guarantee claims for the camera or liability for any
resulting personal damage or material damage will be
accepted if the camera is used for other purposes than
18
1
/
") thread] for
4
.
originally intended, if it is not correctly installed or op-
erated, or not repaired in an expert way.
If the camera is to be put out of operation de-
finitively, take it to a local recycling plant for a
disposal which is not harmful to the environ-
ment.

3 Applications

The colour camera TVCCD-1622COL is specially designed
for use in CCTV surveillance systems. It is equipped with
a motor zoom lens which allows to zoom in a picture detail
up to 22-fold magnification. This magnification factor can
once again be increased twelve times via the digital zoom.
Various adjusting possibilities via an OSD menu allow
to precisely match the camera to the corresponding appli-
cation.