Service And Repairs - Hitachi NT 65MA4 Manuel D'instructions Et De Sécurité

English

SERVICE AND REPAIRS

● Only service personnel trained by
Hitachi, distributor or employer
shall repair the Nailer.
● Use only
recommended by Hitachi for repair.
All quality Nailers will eventually require
servicing or replacement of parts because of
wear from normal use.
NOTE
Specifi cations are subject to change
without any obligation on the part of
HITACHI.
Maintenance chart
ACTION
Drain air line fi lter daily.
Keep lubricator fi lled.
Clean fi lter element and blow
air through fi lter in direction
opposite to normal fl ow daily.
Clean magazine and feeder
mechanism.
Keep push lever working
properly.
Lubricate the Nailer after
nailing.
Drain air compressor daily.
22
WARNING
parts supplied
Prevent accumulation of
moisture and dirt.
Keep the Nailer lubricated.
Prevent clogging of fi lter with
dirt.
Prevent a jam.
Promote operator safety and
effi cient Nailer operation.
Extend the Nailer life.
Keep the Nailer operated
properly.
or
WHY HOW
Open manual petcock.
Fill with Hitachi pneumatic
tool lubricant.
Follow manufacturer's
instructions.
Blow clean daily.
Blow clean daily.
Supply 5 – 10 drops of
lubricant into the Nailer.
Open petcock on air
compressor tank.