General Information; Scope Of Delivery - Gazzini 10035332 Instructions De Montage Et Mode D'emploi

TURN SIGNALS
(Order no. 10035329, Order no. 10035331, Order no. 10035328,
Order no. 10035332, Order no. 10035327)
These instructions for installation and use apply exclusively to
the products described. They contain important information on
installation, safety and warranty. You should always follow
these instructions, including if you give the product to someone
else. Keep them in a safe place so that you can refer to them
again later.

1 | GENERAL INFORMATION

Congratulations on the purchase of this turn signal. To ensure
that it is correctly and securely fastened on your particular
model of motorbike, please observe the following installation
and safety instructions.
This turn signal is not designed for a specific type of vehicle.
The fastening is selected so that it can be successfully used on a
wide range of motorcycle models.
The turn signal has a valid "E" mark and can therefore be used
legally on the road as either a front or rear turn signal, without
the need for additional TÜV test centre approval.

2 | SCOPE OF DELIVERY

Order no. 10035329
1x Power LED turn signal,
1
1x LED, 12 V, 2.7 W
1|
2
3
2|
1x hex nut DIN 934 M8 A2
1x spring washer DIN 137A; A2
3|
13