Accessing The Menus - ResMed AUTOSET SPIRIT Manuel Utilisateur

M
ENU
Depending on the mode that your clinician has set your machine to, either the CPAP
or AutoSet menus appear.
M
ENU
Depending on the type of menu that your clinician has set your machine to, either a
standard menu or a detailed menu appears.
The standard menu allows you to view details about the current software version and
usage time of your
and/or hours for which the
The detailed menu allows you to view and change settings such as mask type,
humidifier used, and the displayed language. You can also view the serial number,
printed circuit board, and current software version of your
Note: Your clinician may have customized your AutoSet Spirit to display Smart Data.
Contact your clinician for further details.
Both types of menu allow you to view and change the ramping time (in CPAP mode)
or settling time (in AutoSet mode).
Figure 1 summarizes the
mode. Figure 2 summarizes the
AutoSet mode.
A
CCESSING THE
To access the
•
Press the Left key (menu) while the Ramp or Settling screen is displayed.
To scroll through items within a menu or submenu:
•
Press the Up/Down key.
To enter a submenu:
•
Press the Left key (enter).
To change a setting option for a function:
•
1. Press the Left key (change).
2. Press the Up/Down key until the desired setting option appears.
3. Press the Left key (apply) to select the setting option.
To exit without changing options:
•
Press the Right key (cancel).
To exit out of a menu or submenu:
•
Press the Right key (exit).
Note: You can return to the Ramp or Settling screen at any time by holding down the
Right key for at least 2 seconds.
18
M
ODE
T
YPE
A S
UTO ET
A
A
UTO
M
ENUS
A S S
UTO ET PIRIT
S . The Used screen displays the total number of days
PIRIT
S S has been used.
UTO ET PIRIT
S S standard menu series in CPAP and AutoSet
ET PIRIT
A S S detailed menu series in CPAP and
UTO ET PIRIT
menus:
A S S .
UTO ET PIRIT