System Specifications; Environmental Conditions; Electromagnetic Compatibility - ResMed AUTOSET SPIRIT Manuel Utilisateur

S S
YSTEM PECIFICATIONS
Performance: Operating pressure range: 4 to 20 cmH
Dimensions (H x W x D): 5.6in x 9.1in x 10.6in
Weight: 5.1lb
Power Supply
Input range 100–240V, 50–60Hz, < 120VA (maximum power consumption)
Actual power consumption will vary, depending on factors such as the use of
accessories, height above sea level and ambient temperature. Power consumption
values for typical treatment conditions (using a breathing machine set to 0.5L and
15 breaths/min with 6ft6in (2m) air tubing and a modular mask) are given in the
following table.
Device
AutoSet Spirit
Housing Construction: Flame retardant engineering thermoplastic

Environmental Conditions

Operating Temperature: +41°F to +104°F
Operating Humidity: 10%–95% non-condensing
Storage and Transport Temperature: -4°F to +140°F
Storage and Transport Humidity: 10%–95% non-condensing

Electromagnetic Compatibility

Product complies with all applicable electromagnetic compatibility requirements
(EMC) according to IEC60601-1-2, for residential, commercial, and light industry
environments.
Air Filter: Two-layered, powder-bonded, polyester non-woven fiber
Air Tubing: Flexible plastic, 6ft6in or 9ft10in length
Pressure Sensor Adapter: Thermoplastic rubber
IEC 60601-1 Classifications: Class II (double insulation), Type CF
Note: The manufacturer reserves the right to change these specifications without notice.
Pressure
Power
(cmH O)
(VA)
2
5 20
10 26
15 32
20 39
O
2
S S
YSTEM PECIFICATIONS
33