Menu Functions - ResMed AUTOSET SPIRIT Manuel Utilisateur

M F
ENU
The A
description of what each function does and the available setting options. To access
these functions see "Using the Menus" on page 17.
R
AMP AND
If your clinician has set your
displayed after the Welcome screen. If your clinician has set your
AutoSet mode, the Settling screen is displayed after the Welcome screen.
Table 1: Ramp and Settling Functions
Screen
Ramp
(CPAP Mode only)
Settling
(AutoSet Mode
only)
Note: The maximum Ramp or Settling time that you can set may be less than 45
minutes, depending on what your clinician has set as the maximum time.
S
ETTINGS
The Settings Menu allows you to view and change certain operating features of the
A S
UTO
Table 2: Settings Menu Functions
Function
Mask
Tube Length
20
UNCTIONS
S S menu functions are summarized in Tables 1–4 below with a brief
UTO ET PIRIT
S
ETTLING
Function Description
Selects the Ramp Time.
Ramp time is the period during
which the A
increases from a low comfortable
pressure to the prescribed
treatment pressure.
Selects the Settling Time.
Settling Time is the period during
which the AutoSet Spirit maintains
a low pressure before it starts to
adjust pressure in response to
respiratory events.
M (D
ENU ETAILED MENU ONLY
S unit.
ET PIRIT
Function Description
Selects your mask type.
Selects the length of air tubing
connecting your mask to the
AutoSet Spirit.
A S S to CPAP mode, the Ramp screen is
UTO ET PIRIT
S S
UTO ET PIRIT
)
A S S
UTO ET PIRIT
Setting Options
OFF–45 min; 5-minute
increments
OFF–45 min; 5-minute
increments
Setting Options
MIRAGE, MIR FULL (Full
Face), STANDARD (Modular/
Vista), ULTRA (Ultra Mirage)
6ft6in / 9ft10in
(2m / 3m)
to