Operating Elements And Connections; Safety Notes - Monacor DMT-3050 Mode D'emploi

GB Please unfold page 3. Then you can always
see the operating elements and connec-
tions described.
1 Operating
Connections
1 LCD multifunction display
2 Button DATA HOLD to freeze in a meas-
ured value
3 Selector button (Ω •
to select the operating modes
4 Button RANGE HOLD for manual selec-
tion of the measuring range
5 Rotary switch to select the measuring
functions
6 Test leads
14
Elements and
• • AC / DC)
2

Safety Notes

This unit corresponds to the EC Directive
89/336/EEC for electromagnetic comptibility.
With this unit very high voltages dangerous
to life can be measured. Be especially care-
ful with voltage measurements above 42 V.
The test leads must always be perfectly
insulated.
For the operation also watch in any case the
following items:
•
The unit is only suitable for indoor use.
•
Protect the unit from humidity and heat
(permissible operating temperature range
0-40°C).
•
If the unit is used for purposes other than
originally intended, if it is overloaded or